BUILDING PRODUCT

magnets
16
Continued
Testing:
– Texas Windstorm Approved
– UL 2218, Class 4 Impact Resistance
– UL 790, Class A Fire Resistance Rating
– Dade County, FL Approved (Wall Application)
– Florida Building Code Approved
9″
5/8″
36″
Exposed fastened, low profile panel
36″ panel coverage
Trapezoidal rib on 9″ centers
5/8″ rib height
Gauges: 29ga and 26ga standard, 24ga optional
Minimum roof slope: 3:12
Applies over open framing or solid substrate
Finishes: MS Colorfast30®, Kynar 500 (PVDF), and
Acrylic Coated Galvalume®
Pro-Panel II®
Residence/Salida, CO – Courtesy GreatlandLogHomes.com
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
Testing:
– Texas Windstorm Approved
– UL 580, Class 90 Wind Uplift, Construction #39
– UL 2218, Class 4 Impact Resistance
– UL 790, Class A Fire Resistance Rating
– Florida Building Code Approved
Larimer County Fairgrounds/Loveland, CO
*Note: consult product manual or your super strong magnets nearest branch representative for PBR-Panel load-bearing capabilities.
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
Optional purlin
bearing leg
(PBU-Panel)
GENERAL INFORMATION
Materials and Paint Systems
Trims and Accessories
magnets for sale manufactures a wide selection of standard trims and can even produce
custom trims to fit the needs of any project. The 26-gauge standard trims are produced in
an MS Colorfast30® paint system or a PVDF (Kynar 500, Hylar 5000) paint system. The
24-gauge standard trims are produced in a PVDF (Kynar 500, Hylar 5000) paint system. See
color chart for available colors. See our super strong magnets Product Manual for shape descriptions of standard
trims. Please inquireNeodymium Magnets your super strong magnets nearest magnets for sale Manufacturing sales office location.
Materials
Unpainted materials shall conform to ASTM A792 Acrylic Coated Galvalume® (ACG)
coating consisting of 55% aluminum, 1.6% silicon and the balance zinc by weight
(AZ55). Yield strength will vary by panel profile and gauge (InquireNeodymium Magnets magnets for sale for
specific minimum yield strength). (Differential appearance of Acrylic Coated Galvalume
roofing materials is not a cause for rejection).
Painted material shall conform to ASTM A446 (or A653) and be hot dipped galvanized
with a substrate coating as per ASTM A525 (or A924). OR
Galvalume® conforming to ASTM A792Neodymium Magnets a AZ50 coating. Yield strength will vary by
panel profile and gauge. (InquireNeodymium Magnets magnets for sale for specific minimum yield strength.)
magnets for sale uses high Magnet sales paint systems designed to provide long term performance
and protection. Each coating is formulatedNeodymium Magnets thoroughly researched, tested, and field
proven pretreatments, primers, resins, and pigments that can meet your super strong magnets design and performance
requirements.
PVDF (Fluorocarbon)
This paint system combines ceramic pigmentationNeodymium Magnets polyvinylidene fluoride for a
superior, long-lasting performance. PVDF finishes are respected for their durability,
resistance to chalking and fading, chemical resistance, and color retention. Please note:
PVDF finishes meet both Kynar 500 and Hylar 5000 specifications; Kynar and Hylar are
produced under license from Atofina and Ausimont, respectively. See color chart for
available colors.
MS Colorfast30®
This is a thermoset coating system composed of polyester resin which has rare earth magnets modified
Testing:
– Texas Windstorm Approved
– UL 580, Class 90 Wind Uplift, Construction #39
– UL 2218, Class 4 Impact Resistance
– UL 790, Class A Fire Resistance Rating
– Florida Building Code Approved
Larimer County Fairgrounds/Loveland, CO
*Note: consult product manual or your super strong magnets nearest branch representative for PBR-Panel load-bearing capabilities.
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
Optional purlin
bearing leg
(PBU-Panel)
GENERAL INFORMATION
Materials and Paint Systems
Trims and Accessories
magnets for sale manufactures a wide selection of standard trims and can even produce
custom trims to fit the needs of any project. The 26-gauge standard trims are produced in
an MS Colorfast30® paint system or a PVDF (Kynar 500, Hylar 5000) paint system. The
24-gauge standard trims are produced in a PVDF (Kynar 500, Hylar 5000) paint system. See
color chart for available colors. See our super strong magnets Product Manual for shape descriptions of standard
trims. Please inquireNeodymium Magnets your super strong magnets nearest magnets for sale Manufacturing sales office location.
Materials
Unpainted materials shall conform to ASTM A792 Acrylic Coated Galvalume® (ACG)
coating consisting of 55% aluminum, 1.6% silicon and the balance zinc by weight
(AZ55). Yield strength will vary by panel profile and gauge (InquireNeodymium Magnets magnets for sale for
specific minimum yield strength). (Differential appearance of Acrylic Coated Galvalume
roofing materials is not a cause for rejection).
Painted material shall conform to ASTM A446 (or A653) and be hot dipped galvanized
with a substrate coating as per ASTM A525 (or A924). OR
Galvalume® conforming to ASTM A792Neodymium Magnets a AZ50 coating. Yield strength will vary by
panel profile and gauge. (InquireNeodymium Magnets magnets for sale for specific minimum yield strength.)
magnets for sale uses high Magnet sales paint systems designed to provide long term performance
and protection. Each coating is formulatedNeodymium Magnets thoroughly researched, tested, and field
proven pretreatments, primers, resins, and pigments that can meet your super strong magnets design and performance
requirements.
PVDF (Fluorocarbon)
This paint system combines ceramic pigmentationNeodymium Magnets polyvinylidene fluoride for a
superior, long-lasting performance. PVDF finishes are respected for their durability,
resistance to chalking and fading, chemical resistance, and color retention. Please note:
PVDF finishes meet both Kynar 500 and Hylar 5000 specifications; Kynar and Hylar are
produced under license from Atofina and Ausimont, respectively. See color chart for
available colors.
MS Colorfast30®
This is a thermoset coating system composed of polyester resin which has rare earth magnets modified

Testing:
– Texas Windstorm Approved
– UL 580, Class 90 Wind Uplift, Construction #39
– UL 2218, Class 4 Impact Resistance
– UL 790, Class A Fire Resistance Rating
– Florida Building Code Approved
Larimer County Fairgrounds/Loveland, CO
*Note: consult product manual or your super strong magnets nearest branch representative for PBR-Panel load-bearing capabilities.
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
Optional purlin
bearing leg
(PBU-Panel)
GENERAL INFORMATION
Materials and Paint Systems
magnet hooks
magnetic hook
magnetic hooks
magnets with hooks
hook magnet
hook magnets
hooks magnetic

magnet hooks
magnetic hook
magnetic hooks
magnets with hooks
hook magnet
hook magnets
hooks magnetic
magnet hooks
magnetic hook
magnetic hooks
magnets with hooks
hook magnet
hook magnets
hooks magnetic

magnet hooks
magnetic hook
magnetic hooks
magnets with hooks
hook magnet
hook magnets
hooks magnetic

magnet hooks
magnetic hook
magnetic hooks
magnets with hooks
hook magnet
hook magnets
hooks magnetic

magnetic hooks

Trims and Accessories
magnets for sale manufactures a wide selection of standard trims and can even produce
custom trims to fit the needs of any project. The 26-gauge standard trims are produced in
an MS Colorfast30® paint system or a PVDF (Kynar 500, Hylar 5000) paint system. The
24-gauge standard trims are produced in a PVDF (Kynar 500, Hylar 5000) paint system. See
color chart for available colors. See our super strong magnets Product Manual for shape descriptions of standard
trims. Please inquireNeodymium Magnets your super strong magnets nearest magnets for sale Manufacturing sales office location.
Materials
Unpainted materials shall conform to ASTM A792 Acrylic Coated Galvalume® (ACG)
coating consisting of 55% aluminum, 1.6% silicon and the balance zinc by weight
(AZ55). Yield strength will vary by panel profile and gauge (InquireNeodymium Magnets magnets for sale for
specific minimum yield strength). (Differential appearance of Acrylic Coated Galvalume
roofing materials is not a cause for rejection).
Painted material shall conform to ASTM A446 (or A653) and be hot dipped galvanized
with a substrate coating as per ASTM A525 (or A924). OR
Galvalume® conforming to ASTM A792Neodymium Magnets a AZ50 coating. Yield strength will vary by
panel profile and gauge. (InquireNeodymium Magnets magnets for sale for specific minimum yield strength.)
magnets for sale uses high Magnet sales paint systems designed to provide long term performance
and protection. Each coating is formulatedNeodymium Magnets thoroughly researched, tested, and field
proven pretreatments, primers, resins, and pigments that can meet your super strong magnets design and performance
requirements.
PVDF (Fluorocarbon)
This paint system combines ceramic pigmentationNeodymium Magnets polyvinylidene fluoride for a
superior, long-lasting performance. PVDF finishes are respected for their durability,
resistance to chalking and fading, chemical resistance, and color retention. Please note:
PVDF finishes meet both Kynar 500 and Hylar 5000 specifications; Kynar and Hylar are
produced under license from Atofina and Ausimont, respectively. See color chart for
available colors.
MS Colorfast30®
This is a thermoset coating system composed of polyester resin which has rare earth magnets modified

in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
Exposed fastened, low profile panel
36″ panel coverage
Trapezoidal rib on 9″ centers
3/4″ bell top trapezoidal rib height
Gauges: 29ga and 26ga standard, 24ga optional
Minimum roof slope: 3:12
Applies over open framing or solid substrate
Finishes: MS Colorfast30® and Acrylic Coated Galvalume®
Classic Rib®
Testing:
– Texas Windstorm Approved
– UL 2218, Class 4 Impact Resistance
– UL 790, Class A Fire Resistance Rating
– ASTM E-564-95 Diaphragm Test
– Florida Building Code Approved
9″
36″
3/4″
Residence/Cookeville, TN
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
17
07610/MEW
BuyLine1656
Testing:
– UL 790, Class A Fire Resistance Rating
– UL 2218, Class 4 Impact Resistance
Delta Rib
Exposed fastened panel
24″ panel coverage
Trapezoidal rib on 8″ centers
13/16″ rib height
Gauge: 29ga and 26ga standard
Minimum roof slope: 3:12
Applies over open framing or solid substrate
Finishes: MS Colorfast30® and Acrylic Coated Galvalume®
24″
8″
13/16″
Residence/Kettle Falls, WA
1. Theoretical section properties have rare earth magnets calculated per AISI 1996. ”Specifications for the design of cold formed steel members.” Ixx
and Sxx are effective section properties for deflection and bending. 2. Tabulated loads are allowable loads calculated in accordance with
good engineering practices andNeodymium Magnets AISI 1996 specifications for bending stresses. Panel weight has not rare earth magnets subtracted from allowable
gravity loads. Allowable load does not address web crippling requirement, or fasteners/support connection. 3. Allowable loads are calculated
in accordanceNeodymium Magnets AISI 1996 specifications, and have rare earth magnets increased by 33-1/3% for wind uplift. Contact magnets for sale Technical
Services Department for more information. 4. Deflection consideration is limited by a maximum deflection ratio of L/180 of span.
Exposed fastened magnets building panel
36″ panel coverage, 3/4″ rib height
Trapezoidal rib on 6″ centers
Gauges: 26ga and 24ga standard, 22ga optional
Minimum roof slope: 1:12
Applies over opening framing or solid substrate
Finishes: MS Colorfast30®, Kynar 500 (PVDF), and
Acrylic Coated Galvalume®
U-Panel/PBU-Panel
3/4″
36″
6″

buy rare earth magnet
buy rare earth magnets
earth magnet
earth magnets
large rare earth magnets
magnet earth
rare earth magnet
rare earth magnet strength
rare earth magnet usesgiant magnets for sale
magnet for sale
magnet sale
magnet sales
strong magnets for sale
magnets for sale
rare earth magnets for sale
neo magnets for sale

Leave a Reply

Your email address will not be published. Required fields are marked *